This article was originally posted July 27, 2018.
This year, one of our long-term ongoing projects is at last near completion: widening our dams and building turnarounds for easier travel during harvest. On a cranberry farm, dams serve two purposes: to detain the water used for irrigation and water management, and for vehicle use. Dam maintenance is highly important for both safety and equipment. Widening dams makes hauling easier, especially since some parts of the operation are quite a distance from our cleaning platform.
Now, instead of several trucks carrying two boxes, we can use a tractor trailer that carries nine and won’t need to use as many trucks. It will be more efficient for both the gathering team and the packing house platform, as well as freeing up team members to be elsewhere if we need them. We’ve planned it out so there’s a route where they can gather the bogs off one dam in order to widen as few turns as possible. It also makes room for new equipment like our bog side cleaners and our Gates Harrow harvesters.
“We’re very close to being done,” says bog renovations manager Steve Manning. “Mostly the gates are all done and we’re just moving dirt for now. It’s a lot easier when we’re doing an active reno because we’re already doing so much redesigning, but we’re trying to get a little ahead of that for future renovations by moving pump houses and shifting some other things around so we don’t have to do it later.” The most difficult part is working with the irrigation, especially in the summertime when heat can be an issue, but this week the weather worked in our favor. “You wouldn’t think this wet weather would help, but we got a lot done.”
“We have Sim Place, the lake, and the west side of 563 all done,” says operations manager Matt Giberson. “Now we’re working the middle, which has the most acreage, and is also the most complicated because of all the old bogs and their various shapes.” Back when the farm was founded, the bogs were dug by hand, so many of the older parts of the farm were designed by necessity to work around the topography. “We drove around a lot to look at everything and think about it for a while,” Matt says. “We’ve been working on this final stage over the last year, and should be done by harvest. We’ve tried to time it with the rain so we don’t have to worry about a heat run or irrigation run during gate installation. And we’ve been thinking ahead to when we renovate in 10 or 15 years down the road. We may end up adding some turnaround spots as we go, since during harvest we ideally want to be able to work from any corner we can. But as of right now, we’re looking to be ready by this year’s harvest.”